Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m.

Description

Metal detector Fortune PRO-2 LCD-display 7 * 4 FM transmitter
Fortune PRO-2 / Fortuna PRO-2 metal detector with FM transmitter is a professional metal detector, which was the last device from the Fortune line of metal detectors. It contains all the best features of Fortuna PRO and Fortune M3 devices, which made it even faster and more ergonomic.
The main differences between the Fortune PRO-2 metal detector and its predecessors:
Thanks to the use of two processors and software optimization, the device has become much faster than its predecessors. Speed ​​and separation increase the tenacity of finds.
Fortune PRO-2 does not need a sensor balancing module. The residual imbalance of the sensor up to 4.3V does not affect the operation of the device.
Additionally, the "Analog Search" mode has been introduced.
Now you can connect dual-frequency coils. A dual frequency coil comes with a metal detector.
An FM modulator is used for use with FM headphones.
Unlike MD Fortuna-Pro, an LCD display with white backlight is used, which is convenient when working in the sun.
Fortune PRO-2 is quite simple to operate, and at the same time a rather flexible device, it will be very convenient to plan work on any soil, automatic ground offsets are fast and accurate, at the same time the display constantly displays the signal from the ground in the form of a marker, as well the number of soil phases is constantly displayed. Now it is clearly visible that the soil, for example, has changed and in which direction it should be moved manually, or rebalanced automatically, if necessary.
The speed of work is impressive, as is the separation. The speed of this device allows you to search in rather weedy places, distinguishing and discriminating against unwanted targets. And the high sensitivity of the device will allow you to successfully search even on a knocked out area.
Fortune PRO-2 is a complete alternative to any branded device, even top.
Metal Discrimination - VDI Numeric and Bar. (different objects and metal alloys correspond to their digital value)
The device is multi-frequency, with it you can use different coils with different frequencies, as well as dual-frequency coils.
The ability to mask, exclude unwanted metal from the search. For example, exclude iron.
Characteristics:
Discrimination visual indication: VDI (VDI) number, synograph, dynamic signal strength scale.
Voice of the target: 90-tone, 4-tone, two-tone, volume control.
Added "Beach" mode to search for fine gold.
Ground balance: manual, automatic.
Ferrite tuning: manual,
FM transmitter, for connecting wireless headphones.
Signal processing speed: very high.
Sensor unbalance indication.
There is no need for a sensor balancing module. The residual imbalance of the sensor up to 4.3V does not affect the operation of the device.
Battery Discharge Indication
Sensitivity adjustment
Masks The ability to mask unwanted metal.
Several search algorithms.
Pinpointer.
Tuning the device to the frequency of the existing sensor.
Frequency of the device: 4-20 kHz.
Number of profiles for sensors: Four profiles for different search sensors and an additional 2 profiles for dual frequency.
DD 25 sensor two-frequency (included 8/12 kHz).
Display backlight
LCD 7x4 cm.
Case dimensions: 140 × 99 × 32 mm.
Improved component base used
High block stability
The latest firmware is available.
The main parameters of this assembly:
2200 Li-ion battery (real capacity) mAh 3.7V;
collapsible, adjustable rod, the lower part is impact-resistant plastic, the upper part is high-strength aluminum, coated with factory powder paint;
high-quality board, factory-made, double-sided, with a protective mask and plating holes.
For nutrition:
1. In a complete set, the unit is powered by 3.7 V (lithium battery 18650 by 2200 mAh).
2. If the power will be made its own, then it is possible from 2 to 9 V.
3. Power connector for mic 325 2pin plug.
4. The pinout of the sensor connector is as follows:
1 - RX +
2 - RX -
3 - +5v frequency switching
4 - ТХ +
5 - ТХ -
5. Sensor frequency: 8/12 kHz (default).
6. Spacing between TX-RX: 2 kHz.
Detection range of the Fortune PRO-2 / Fortune PRO-2 metal detector in the air:
DD 25 / current 100 mA / frequency spacing 2 kHz / sens 3.
50 cents 1981: 42 cm.
average detection range = 32-57 cm per coin.
large metal objects up to 150-200 cm.
Additional functions:
- pinpoint mode;
- FonScan mode, allows you to search for deep-lying objects (Similar to the PB-CT function)
- The "Shift VDI" mode allows you to stretch low-conductive targets, such as fine gold and metal;
- Added "Beach" mode to search for small gold;
- mode discrimination / all metals;
- adjustment of the signal gain from 0% to 100% (input operational amplifier);
- sound signal of overload and display;
- impulse noise filter;
- the ability to set current in TX;
- Ability to use dual-frequency sensors;
- the ability to adjust the bar.
Contents of delivery:
Functional block of the device.
Sensor.
Collapsible bar.
Battery
Charger.
Instruction
Made in Ukraine! Quality, reliability, good depth indicators, ease of use!
Free Shipping.
Tracking number. Carefully package.
World Wide shipping
14-55 working days.