Underground Metal Detector Gold Digger Treasure Hunter Tracker GoldSilver Finder

Description

Special Offers
Newly Listed
All Auctions
Buy It Now
Contact Us
Shop Category
Store Home
Automotive Tester
Digital Multimeter
Digital Clamp Meter
Voltage Tester
Environment Tester
Battery Tester
Metal Detector
Pen Probe Digital Multimeter
Stud Finder
Wood Moisture Tester
Handheld Digital Scopemeter
Professional Tester
Home Meter
Netcable Tester
Other
Underground Metal Detector Gold Digger Treasure Hunter Tracker GoldSilver Finder
This metal detector can locates the target accurately. It has strong resolving power and can be operated easily. The instrument is mainly used for the detection and identification of the metal object which is buried underground. Besides the use in military affairs, it can also be used as follows:
Check in custom and check for safe
Be used by police for detection
Detect metal object in material, fuel and food
Detect the metal object in post and baggage
Detect the underground pipe and cable
Archaeological studies and detect mineral
Search the underground golden and silvern treasure besides underground metal culture relic
There is a Ground Balance circuit in the metal detector, and the circuit can exclude all disturbances from soil(The disturbance is called "Mineralization Reaction"). The instrument will not give signal until the search coil meets metal, so the detecting accuracy and detecting depth can be improved greatly.
Notice:
The package without battery, because shipping service does not allowed batteries inside the package.
This instrument is a treasure hunter type metal detector.
It has only one knob and is equipped with a system which can exclude ferrous metal from being detected when active.
Two selectable detection modes: All-Metal mode and Non-Ferrous Metal mode.
In All-Metal mode, this instrument can detect all kinds of metal targets.
In Non-Ferrous Metal mode, this instrument can detect non-ferrous metal targets, such as gold, silver, copper, aluminum, etc.
This metal detector is powered by a built-in lithium battery and is very easy to operate.
Specification
Max. Detecting Depth: 120cm for an iron plate which is 30cm wide, 30cm long and 1cm thick and which is buried in dry soil
Operating Environment: Temperature: 0℃ ~ 50℃, Relative Humidity: 85%
Storage Environment: Temperature: -20℃ ~ 50℃,Relative Humidity: 85%
Battery: Built-in lithium battery(Provided by seller)
Weight: About 1.6kg
How to Detect Metal Object in Non-Ferrous Metal Mode
1. Press the SELECT key until the display shows " M" under the NON-FERROUS METAL mark which is just above the display.
Now the detector is in Non-Ferrous Metal mode.
2. Carefully adjust the CRITICAL VOICES knob until the detector emits a faint sound (threshold sound).
Hold the detector by its handle with your arm relaxed on the armrest.
During detection, the searchcoil should be parallel to and about 10cm above the ground.
Walk slowly forwards while moving the searchcoil slowly from side to side.
When the detector detects non-ferrous metal object, the volume of the detector's sound will increase and the number of the displayed level indicator bars will also increase.
When the detector detects ferrous metal object, it will not give alarm or it will sound very short beep(s).
Item Specifics
Brand
all-sun
Model
TS166A
Country/Region of Manufacture
China
Intended Use
General Purpose
Type
Ground Search
Features
Discrimination Knob
Operating Mode
Ground Balance/Identify
Special Features
Phase Adjusting/Earphone Jack
Master Frequency
465KHz±2KHz
Signal Frequncy
454Hz±2Hz
Max. Detection Depth
about 1.2M(Depends on the object)
Power Consumption
0.6W
Power Supply
9V, DC, AA Battery *6
MPN
allsunTS166A
UPC
788537553229
Shipping
Returns
Customer Services
Copyright of XXXX. All rights reserved.
Powered by SoldEazy
On Apr-22-19 at 01:40:54 PDT, seller added the following information: