Wizard Staple/Needle Metal Detector

Description

Wizard Industries Staple and Needle Detector -
Wizard Needle / Staple Detector III
Demonstration video: https://youtu.be/Bv0Hke2Ig7o
More Information
This is a
very powerful
ferrous
detecting metal detector...
This powerful detector can detect trace amounts of metallic compounds commonly found in inexpensive printer toner. Detection of metal in inexpensive recycled printer toner does not constitute false readings. If using for metal detection in printed documents we strongly advise you to allow us to test your common type printed documents to be certain the detector will meet your needs.
Specification: MAGNETIC INDUCTION METAL DETECTOR
1. Electrical Source 110Volt AC
2. Power: 30 watts
3. Operating Temperature: 50-105 degrees
4. Sensitivity: Diameter of steel ball (mm): more then 1.0mm and can detect 2.0mm long needle or other ferrous metal object.
5. Alarm: Audible and visual
6. Unit Size: 26 x 14.5 x 3 inches
7. Detection Area: 19 x 14 inches.
8. Weight: Approximately 25 lbs
Notice:
1. The instrument should be kept away from these type devices: Strong magnetic machinery, large power transformers, electromagnets, hard drives, radio frequency devices, sensitive electronic devices. Keep a typical distance of 10 feet for any precision or delicate electronic devices in order to not cause interference.
2. The instrument should be laid flat on a non-metallic, solid, strong surface. Be aware of metal screws, bolts or other fasteners under work surface in order to not cause false detections.
3. Work environment should be indoors room temperature of over 65 degrees, only in a dry and ventilated area in order to avoid moisture or high humidity contact with the electronics inside the device.